RUN: Determine length of surface to light referred to as a “run”. Convert the measurement of the run to inches for easy calculations.
Example: 12” run = 144”
SPACING: For general task illumination space lampholders 6” on centerLAMPHOLDERS: Divide the run by the spacing chosen. This will determine the number of lampholders needed.
Example: 8’ run = 96” , 96” divided by 4” spacing = 32 lampholders
LAMPS: Choose between a clear or frosted 12V 5 Watt T3 Festoon Base Xenon bulbs.
TRANSFORMERS: Multiply the watts consumed per lamp by the number of lamps required for the specified run. This result will equate to the total number of watts consumed in the run which will then determine the transformer wattage size required.
CABLE: Determine the length of cable required based on the total length of all runs. Additional cable may be necessary, depending on transformer location. Example: 144” + 24” from run to transformer = 168” of cable.
TRACK: Determine the number of track required based on the total length of all runs and cable length. Track sections are sold in 4’ lengths and may be cut to desired size |
